Call Us Today (949) 510-7249
Cart 0

FotoCrane 2 dual arm 8 foot variable length camera jib for cameras up to 12lbs.

The FotoCrane2 was created as a result of that customer feedback requesting a dual arm lightweight crane able to support a wide variety of DSLR and modern high performance cameras such as the new 4:3 systems as well as the exciting BlackMagic Cinema Cameras and be very mobile.


”fc2-weight-bar-retracted-300-8.jpg"

Telescopic Aluminum Tubes

The FotoCrane2 uses a three-part telescoping aluminum tube system. Both the weight bar section and the camera section telescope in and out of the chassis section allowing variable lengths from 46 inches to 8 feet, so it can meet a wide range of applications inside and out. The weight bar can be adjusted allowing for easy and quick balancing and setup.

Small and Easy to Transport

The FotoCrane2 weighs less than 11 lbs. (5 kg), making it easy to transport. With a retracted size of only 42 inches it’s also, easy to store and can fit behind almost anything, so it does not take up a lot of room when you are transporting or storing.



Integrated Pan & Tilt

Cameras can be mounted directly on the camera bracket via a slot for quick release, or via a wide variety of other mounts. The FotoCrane 2 includes our cable operated Panning systems, so it both pans and tilts remotely or automatically. You can add our ProLine Intelligent Motion Control head or any other small motorized pan tilt heads are supported as well as our 501 release plate systems, allowing you to quick release using your 501 sliding plate.

Manual or Static Tilting

You can lock the tilt in any position, so that it stays where you set it in relation to the movement of the boom, or you can manually tilt the camera benefiting from the drag of your fluid head causing the camera to tilt forward or back. You can even tilt while booming and you can do it very smoothly because when you tilt the handle you actually tilt the tripod head, so if you like tilting with lots of drag or just a little, you can easily select the drag at your leisure, meeting any shooting requirement.

The crane can be mounted on virtually any medium or heavy-duty video tripod. Including small Benro KH25 with go pros and smart phones, and Manfrotto 500 series including 501, 502 and 503 systems using cameras up to about 12 lbs. They also support - with small cameras - other lightweight, affordable tripods, making the whole system considerably more affordable than some of the other heavier units available.


Features:

Compact size Telescopes down to only 42" for easy transport.
Easy to transport Easy to use in confined area.
Lightweight Made of Lightweight Aluminum. Weight: 5kg
Sets up quickly You are ready to get the shot and don’t have to waste time assembling your gear.
Powdercoat finish Resists scratches, eliminates reflections.
Multi function Boom, Swing, variety of tilting capabilities.
Variable Length From 111 cm to 245cm, adapts to your needs
Versatile mount Works on a very wide range of medium and heavy duty tripods.
Smooth, Fluid Movement Benefits from drag of your fluid heads.

Specifications:

Specs:

FotoCrane2

Length 243 cm to 111 cm / 8 feet to 3.5 feet
Length from pivot to camera From 182 cm to 111 cm / 6 feet
Construction Aluminum
Payload Capacity 5 kg / 11 lbs
Counterbalance System Barbell weights or Optional Weight bag (Not Included)
Height 333 cm / 11 feet
Boom Range From 182 cm to 111 cm / 6 feet to 4" from ground level
Tilt Lock Locks with existing fluid head tilt lock
Tilt Drag Drags with existing fluid head tilt drag
Tilt Range Up to 70 degrees forward, 50 degrees back
Swing Lock Locks with existing fluid head pan lock
Swing Drag Drags with existing fluid head pan drag
Swing Range 360°
Tripod Attachment Uses existing release plate
Tripod Types Works with any medium to heavy duty video tripod
Head Attachment 1/4-20 Camera Attachment (included)
Fold Down 1.2 meters / 44 inches
Weight 5 kilos / 11.2 lbs.
Recommended Tripod 9 kilo capacity and up
Aprox. Counterweight 3.5 * / 4.5 * your camera weight / w/extension

Accessories to Enhance your Work

The FotoCrane2 works with a variety of accessories making your work easier at every step. Our Tracking Dolly takes your capabilities to the next level by providing super smooth slides and dolly moves. The dolly comes with five meters of pre-cut track and can be easily setup in less than a minute. Monitors, camera controllers, Weight bags and a variety of additional accessories are available to help make your work easier.

FotoCrane2 

FotoCrane2

$399.99

 

 

FotoCrane2 w/ Pan & Tilt & Bag Set

  • FotoCrane2
  •  PAN and TILT
  • 44” Padded BackPack
  • Weight Bag

$599.99

Save

  Call us at 949 510-7249 and we can put together a kit with whatever you need.